Original 800w diode laser stack Syneron Description:
This VS-MI-100-8-Syneron A is 8 bars laser stack special for syneron-candala 808nm diode laser hair removal handpieces.
Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power
Syneron laser hair removal handle Repairing procedure
>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B:Â if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.
Original 800w diode laser stack Syneron Advantages
>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime. we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before
>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.
Â
Original 800w diode laser stack Syneron Specification
| Model NO. | VS-MI-100-8-Syneron A |
| Application | Syneron-candala 808nm diode laser hair removal Handpiece Repair And Replacement |
| Function | Hair removal, Skin rejuvenation |
| Central wavelength at 25℃ | 808±5nm |
| Laser bar | Germany Jenoptik bar |
| Laser stack type | Micro channel cooled vertical diode laser stack |
| Operation mode | CW |
| Laser power | 800W |
| Per bar power | 100W |
| Bars number | 8 pieces |
| Maximum operating voltage | 16V |
| Fast axis divergence (FWHM) | 39º |
| Slow axis divergence (FWHM) | 8º |
| Typical pitch per bar | 1.8mm |
| Expected lifetime | >10000 hours |
| Cooling system | Micro channel cooler + Water + TEC |
| Water cooling condition | 1.Flow rate: 0.3L/min ±10% / bar
2.water temperature: 15~25℃ 3.Water quality: Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm 4.Cooling: Don’t use any material that combined with copper, that would form galvanic elements |
Original 800w diode laser stack Syneron Dimension
Original 800w diode laser stack Syneron Application
Any more questions please contact Danny whatsapp 0086-18518945778
