Thursday, October 10, 2024
Home808nm Diode Laser StackDVS-1010AI 0001 OE Similar 500W diode laser module replacement

DVS-1010AI 0001 OE Similar 500W diode laser module replacement

OE Similar 500W diode laser module description:

This DVS-500 Macro channel diode laser stack 10bar Model B for hair removal which has 10bars with a aluminum shell. The water holes are on the back of the stack. Electrodes are on the back of stack also.

This diode laser stack usually burn out after working 1year. Then it need to be refresh. Or you can buy a new one to replace the old one.

OE Similar 500W diode laser module Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.

DVS-500 Macro channel diode Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.

OE Similar 500W diode laser module Specifications:

Model No.

VS-MA-50-10 Model A/DVS-500

Application

laser hair removal handpiece Repair And Replacement

Operation Mode

CW

Power per submounts

50W

Number of submounts in one stack

10bars

Central wavelength at 25℃

808 ± 5nm

Typical Operation current

40A

Maximum Operating current

50A

Typical Threshold current

8A

Maximum Operating Voltage

<20V

Fast Axis Divergence (FWHM)

39º

Slow Axis Divergence (FWHM)

8º

Operation Condition

non-condensing atmosphere, cleaning room

Expected lifetime

10 millions shots

Typical pitch per bar

2mm

Cooling requirement

Flow rate

>3.5L/min

Water Temperature

27+-3°C

Water Quality

pure water

cooling system

Do not use any material that combination with copper would form galvanic elements

DVS-1010AI 0001 diode laser moduel Dimension:

Any more question please kindly contact Danny whatsapp 0086-18518945778

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Contact Us

Name: Danny.Jin
Email: [email protected]
Whatsapp: 0086-18518945778

POPULAR CATEGORY