DVS-1010AI 0001 OE Similar 500W diode laser module replacement

OE Similar 500W diode laser module description:

This DVS-500 Macro channel diode laser stack 10bar Model B for hair removal which has 10bars with a aluminum shell. The water holes are on the back of the stack. Electrodes are on the back of stack also.

This diode laser stack usually burn out after working 1year. Then it need to be refresh. Or you can buy a new one to replace the old one.

OE Similar 500W diode laser module Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.

DVS-500 Macro channel diode Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.

OE Similar 500W diode laser module Specifications:

Model No.

VS-MA-50-10 Model A/DVS-500

Application

laser hair removal handpiece Repair And Replacement

Operation Mode

CW

Power per submounts

50W

Number of submounts in one stack

10bars

Central wavelength at 25℃

808 ± 5nm

Typical Operation current

40A

Maximum Operating current

50A

Typical Threshold current

8A

Maximum Operating Voltage

<20V

Fast Axis Divergence (FWHM)

39º

Slow Axis Divergence (FWHM)

Operation Condition

non-condensing atmosphere, cleaning room

Expected lifetime

10 millions shots

Typical pitch per bar

2mm

Cooling requirement

Flow rate

>3.5L/min

Water Temperature

27+-3°C

Water Quality

pure water

cooling system

Do not use any material that combination with copper would form galvanic elements

DVS-1010AI 0001 diode laser moduel Dimension:

Any more question please kindly contact Danny whatsapp 0086-18518945778

VS-MA-50-10 Model A/DVS-500 Macro channel diode module for repairing

DVS-500 Macro channel diode details:

This DVS-500 Macro channel diode laser stack 10bar Model A for hair removal which has 10bars with a aluminum shell. The water holes are on the back of the stack. Electrodes are on the back of stack also.

This diode laser stack usually burn out after working 1year. Then it need to be refresh. Or you can buy a new one to replace the old one.

DVS-500 Macro channel diode Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.

DVS-500 Macro channel diode Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.

DVS-500 Macro channel diode Specifications:

Model No.

VS-MA-50-10 Model A/DVS-500

Application

laser hair removal handpiece Repair And Replacement

Operation Mode

CW

Power per submounts

50W

Number of submounts in one stack

10bars

Central wavelength at 25℃

808 ± 5nm

Typical Operation current

40A

Maximum Operating current

50A

Typical Threshold current

8A

Maximum Operating Voltage

<20V

Fast Axis Divergence (FWHM)

39º

Slow Axis Divergence (FWHM)

Operation Condition

non-condensing atmosphere, cleaning room

Expected lifetime

10 millions shots

Typical pitch per bar

2mm

Cooling requirement

Flow rate

>3.5L/min

Water Temperature

27+-3°C

Water Quality

pure water

cooling system

Do not use any material that combination with copper would form galvanic elements

VS-MA-50-10 Model A/DVS-500 Dimension:

Any more questions please contact danny whatsapp 0086-18518945778.

VS-MA-10-1.0-Model D 500W diode for 808nm laser hair removal device replacement

500W diode for 808nm laser hair removal device details:

This diode laser stack 10bar Model D for hair removal which has 10bars with a aluminum shell. The water connectors are on the side. One is straight. another is right angle. One electrode is on the top. another electrode is on the bottom.

500W diode for 808nm laser hair removal device Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.

500W diode for 808nm laser hair removal device Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.

500W diode for 808nm laser hair removal device Specifications:

Model No.

VS-MA-50-10 Model D/GTHM-500

Application

laser hair removal handpiece Repair And Replacement

Operation Mode

CW

Power per submounts

50W

Number of submounts in one stack

10bars

Central wavelength at 25℃

808 ± 5nm

Typical Operation current

40A

Maximum Operating current

50A

Typical Threshold current

8A

Maximum Operating Voltage

<20V

Fast Axis Divergence (FWHM)

39º

Slow Axis Divergence (FWHM)

Operation Condition

non-condensing atmosphere, cleaning room

Expected lifetime

10 millions shots

Typical pitch per bar

2mm

Cooling requirement

Flow rate

>3.5L/min

Water Temperature

27+-3°C

Water Quality

pure water

cooling system

Do not use any material that combination with copper would form galvanic elements

500W macro channel diode laser module Dimension:

VS-MA-50-10 Model C 808nm 500W laser diode bar for replacement hair removal laser tips

808nm 500W laser diode bar details:

This diode laser stack 10bar Model G for hair removal which has 10bars with a aluminum shell. The straight water connectors are on the bottom with extra 2 small water connector for peltier cooling. Electrodes are on the back of stack.

This diode laser stack usually burn out after working 1year. Then it need to be refresh. Or you can buy a new one to replace the old one.

808nm 500W laser diode bar Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.

808nm 500W laser diode bar Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.

808nm 500W laser diode bar Specifications:

Model No.

VS-MA-50-10 Model F/GTHM-500

Application

laser hair removal handpiece Repair And Replacement

Operation Mode

CW

Power per submounts

50W

Number of submounts in one stack

10bars

Central wavelength at 25℃

808 ± 5nm

Typical Operation current

40A

Maximum Operating current

50A

Typical Threshold current

8A

Maximum Operating Voltage

<20V

Fast Axis Divergence (FWHM)

39º

Slow Axis Divergence (FWHM)

Operation Condition

non-condensing atmosphere, cleaning room

Expected lifetime

10 millions shots

Typical pitch per bar

2mm

Cooling requirement

Flow rate

>3.5L/min

Water Temperature

27+-3°C

Water Quality

pure water

cooling system

Do not use any material that combination with copper would form galvanic elements

808nm 500W laser diode bar Dimension:

Any more question please contact Danny whatsapp 0086-18518945778

 

GTMH-500 MA diode laser module for laser hair removal device

GTMH-500 MA diode laser module Details:

This diode laser stack 10bar Model G for hair removal which has 10bars with a aluminum shell. The straight water connectors are on the bottom with extra 2 small water connector for peltier cooling. Electrodes are on the back of stack.

This diode laser stack usually burn out after working 1year. Then it need to be refresh. Or you can buy a new one to replace the old one.

GTMH-500 MA diode laser module Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.

GTMH-500 MA diode laser module Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.

GTMH-500 MA diode laser module Specifications:

Model No.

VS-MA-50-10 Model F/GTHM-500

Application

laser hair removal handpiece Repair And Replacement

Operation Mode

CW

Power per submounts

50W

Number of submounts in one stack

10bars

Central wavelength at 25℃

808 ± 5nm

Typical Operation current

40A

Maximum Operating current

50A

Typical Threshold current

8A

Maximum Operating Voltage

<20V

Fast Axis Divergence (FWHM)

39º

Slow Axis Divergence (FWHM)

Operation Condition

non-condensing atmosphere, cleaning room

Expected lifetime

10 millions shots

Typical pitch per bar

2mm

Cooling requirement

Flow rate

>3.5L/min

Water Temperature

27+-3°C

Water Quality

pure water

cooling system

Do not use any material that combination with copper would form galvanic elements

GTMH-500 MA diode laser module Dimension:

If any more question please kindly contact my whatsapp 0086-18518945778

Lasertel brand GTH-500-MA 500W macro channel diode laser module

500W macro channel diode laser module Details:

This VS-MA-50-5-GTH is an 808nm diode laser stack, which has 5pcs bars mounted on an big cooper heatsink. This stack has an aluminum shell. Electrodes are on the back of the stack. This kinds of stack maybe have 3 real bars with 2 decorate bars or 4 real bars with 1 decorate bars or 5 real bars.

It is used for 808nm diode laser hair removal handpiece repairing and replacement. Usually in Cheap machine from China.

500W macro channel diode laser module Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

500W macro channel diode laser module Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.    

500W macro channel diode laser module Specifications:

Model No. 

VS-MA-50-10 Model F/GTHM-500

Application

laser hair removal handpiece Repair And Replacement

Operation Mode

CW

Power per submounts

50W

Number of submounts in one stack

10bars

Central wavelength at 25℃

808 ± 5nm

Typical Operation current

40A

Maximum Operating current

50A

Typical Threshold current

8A

Maximum Operating Voltage

<20V

Fast Axis Divergence (FWHM)

39º

Slow Axis Divergence (FWHM)

Operation Condition

non-condensing atmosphere, cleaning room

Expected lifetime

10 millions shots

Typical pitch per bar

2mm

Cooling requirement

 

Flow rate

>3.5L/min 

Water Temperature

27+-3°C

Water Quality

pure water

cooling system

Do not use any material that combination with copper would form galvanic elements

500W macro channel diode laser module Dimension:

Any more question please contact Danny whatsapp 0086-18518945778.

 

GT Optics 10 bars macro channel diode laser lamps 600W for sale

GT Optics 10 bars macro channel diode laser lamps 600W for sale

This GT Optics 10 bars macro channel diode laser lamps 600W is used for 808nm diode laser hair removal machine handle pieces repairing and replacement.

  • Genneral 600W 808nm diode laser stack with 10bars.
  • water pipe is at the side of laser stack.
  • Suitable for most of economic diode laser hair removal machine from china.
  • All the bars are imported from German and mounted by oriental-laser.
  • Buy the laser stack and replace the old broken one to let your hair removal handle have new life.

Diode laser lamps 600W

Diode laser lamps 600W Description:

Model: VS-MA-808-600-GT10

Wavelength: 808nm

Output power: 600w

Operation mode: CW

Cooling: Actively macro channel cooling

High efficiency

High optical output power of 50W per bar.

Diode laser lamps 600W Structure Dimensions:

More about Laser stack:

Oriental-laser provides types of laser stack. We are using high quality Germany Jenoptik diode bar, imported Micro channel cooler and advanced laser technology to make the best quality diode laser stack.

If any more questions please contact Danny whatsapp 0086-18518945778

500W diode laser lamp for ADSS 16V02687-150838 replacement

500W diode laser lamp for ADSS 16V02687-150838 replacement

This 500W diode laser lamp is 10 bar macro channel diode stack for ADSS 16V02687-150838 replacement.So if you have similar diode laser handle, but broken and need repairing service please contact us for support.

500W diode laser lamp

(1) Feature

  1. The diode laser module comprises a 10bars macro channel diode laser stack,
  2. The diode laser module with a protective window.
  3. Symmetry beam.
  4. Simple water cooling and nohigh pressure and high-quality water.

500W diode laser lamp Specification:

Type GTHM-500
Wavelength 808nm
Output peak power 500W
Maximum operating current 50A
Maximum pulse width 400ms
Maximum duty cycle 40%

500W diode laser lamp Dimension:

500W diode laser lamp

500W diode laser lamp application:

500W diode laser lamp

Any more question please kindly let us know by whatsapp 0086-18518945778

WhatsApp chat