Honkon 300W diode laser bar module details

Honkon 300W diode laser bar module is made of 3 bars 100W Jenoptik bar, it was used for Honkon Laser repairing and refurbishment service. If you have similar diode module laser handle which can not work correctly now, please contact Danny for service.

Honkon 300W diode laser bar Specifictaions:

Model No	VS-MI-808-100-5-ST-1X6V-02-0094
Application	Honkon 300W diode laser bar
Operation Mode	CW
Number of submounts	3 Bars
Power per submounts	100W
Central wavelength at 25℃	808 ± 5nm
Maximum Operating Voltage	10 V
Fast Axis Divergence (FWHM)	No
Slow Axis Divergence (FWHM)	No
Expected lifetime	>10000 hours
Typical pitch per bar	1.8mm
Cooling:
Flow rate	0.3L/min ±10% / bar
Water Temperature	15-25 ℃
Water Quality	Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm

Honkon 300W diode laser bar Dimensions:

Honkon 300W diode laser bar Application: 

Any more question please kindly contact Danny whatsapp 0086-18518945778

Focus Light 400W diode laser module Details:

This Focus Light 400W diode laser module was made for repairing and replacement of hair removal device. They can be optional from 3bars,4 bars and  5bars.If you have similar diode module need to be repaired, please kindly contact Danny.

Focus Light 400W diode laser module Specifictaions:

Model No	VS-MI-808-100-4-N1
Application	Focus Light 400W diode laser module for epilator system
Operation Mode	CW
Number of submounts	4 Bars
Power per submounts	100W or 60w optional
Central wavelength at 25℃	808 ± 5nm
Maximum Operating Voltage	8V
Fast Axis Divergence (FWHM)	No
Slow Axis Divergence (FWHM)	No
Expected lifetime	>10000 hours
Typical pitch per bar	1.8mm
Cooling:
Flow rate	0.3L/min ±10% / bar
Water Temperature	15-25 ℃
Water Quality	Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system	Do not use any material that combination with copper would form galvanic elements

Focus Light 400W diode laser module dimension Scheme:

With this laser diode stack dimension scheme, please kindly confirm with your engineer about the size, length, width and height of the diode laser stack. Also for the holes position must be accuratly the same.

 

This is 4 bars* 100W diode laser stack for replacement of laser hair removal machine. If your handle have some bar not working but you do not want to pay high cost for a new handle gun. You can buy just a new stack to do replacement in your side if you have professional engineer and good working environments. Also this kind of stack have similar design for diode 300W,400W,500W,600W and 700W. Just need confirm how many bar for working 100W is ok.

Any more question please contact my whatsapp 0086-18518945778

 

Honkon laser 400W diode module FL000556 details

Honkon laser 400W diode module FL000556 is made with 4 bars 100W Jenoptik bar to replace the diode stack from HONKON laser hair removal machine. They have different bars quantity from 3 to 5 optional. If you have any similar diode inquiry please contat Danny.

Honkon laser 400W diode module FL000556 Specifictaions:

Model No	VS-MI-808-100-4-FL000556
Application	Honkon laser 400W diode module FL000556
Operation Mode	CW
Number of submounts	4 Bars
Power per submounts	100W
Central wavelength at 25℃	808 ± 5nm
Maximum Operating Voltage	8 V
Fast Axis Divergence (FWHM)	No
Slow Axis Divergence (FWHM)	No
Expected lifetime	>10000 hours
Typical pitch per bar	1.8mm
Cooling:
Flow rate	0.3L/min ±10% / bar
Water Temperature	15-25 ℃
Water Quality	Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm

Honkon laser 400W diode module FL000556 Dimensions:

Honkon laser 400W diode module FL000556 Application:

Any more question please contact Danny whatsapp 0086-18518945778

ST-1X6V-02-0094 Honkon Laser 500W diode stack Details:

This ST-1X6V-02-0094 Honkon Laser 500W diode stack is specially designed for Honkon Laser hair removal machine. It was made by 3 to 5 bars 100W per bar. You will have the similar design as the following showed:

ST-1X6V-02-0094 Honkon Laser 500W diode stack Specifictaions:

Model No	VS-MI-808-100-5-ST-1X6V-02-0094
Application	ST-1X6V-02-0094 Honkon Laser 500W diode stack
Operation Mode	CW
Number of submounts	5 Bars
Power per submounts	100W
Central wavelength at 25℃	808 ± 5nm
Maximum Operating Voltage	10 V
Fast Axis Divergence (FWHM)	No
Slow Axis Divergence (FWHM)	No
Expected lifetime	>10000 hours
Typical pitch per bar	1.8mm
Cooling:
Flow rate	0.3L/min ±10% / bar
Water Temperature	15-25 ℃
Water Quality	Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm

ST-1X6V-02-0094 Honkon Laser 500W diode stack Dimensions:

ST-1X6V-02-0094 Honkon Laser 500W diode stack Application:

Any more interest please kindly contact Danny whatsapp 0086-18518945778

FL000465 diode head 300W description:

This FL000465 diode head 300W for laser hair remover system is with Germany laser bar and Germany micro channel cooling.It is used for many brand of hair removal handle piece repairing and replacement.Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various diode laser stacks.

FL000465 diode head 300W Specifictaions:

Model No	VS-MI-808-100-3-FL000465 diode head 300W
Application	FL000465 diode head 300W
Operation Mode	CW
Number of submounts	3 Bars
Power per submounts	100W
Central wavelength at 25℃	808 ± 5nm
Maximum Operating Voltage	6 V
Fast Axis Divergence (FWHM)	No
Slow Axis Divergence (FWHM)	No
Expected lifetime	>10000 hours
Typical pitch per bar	1.8mm
Cooling:
Flow rate	0.3L/min ±10% / bar
Water Temperature	15-25 ℃
Water Quality	Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm

FL000465 diode head 300W Dimensions:

FL000465 diode head 300W Application:

This kind of FL000645 diode head can be used for 810nm Korea or Germany laser surgical equipment from ITC co,.ltd like the following:

Any more question or interest please contact Danny whatsapp 0086-18518945778