3D NM Alma laser soprano ice platinum laser tip solution

3D NM Alma laser soprano ice platinum laser tip solution

If your 3D NM Alma laser soprano ice platinum laser tip need to be repaired, you can have the following 2 solutions:

FIRST solution is to replace old handle with new handle, oriental-laser can offer you a new handle without connector & I-bottom but with same power to match well.

 

This diode handle HP-Alma ICE is specially designed for 3D NM Alma laser soprano ice platinum laser tip Replacement. Engineers who want to repair 3D NM Alma laser soprano ice platinum laser tip or want to buy a new handle to replace old handle, you can buy a new handle to add Ibottom inside the handle connector to continue longer lifetime of the old machine.Also you should soldering old handle connector if the new connector not suitable or matched your old handle connector on the machine side,please find the details of picture following:

  1. Black Diode laser —
  2. Red Diode laser +
  3. Green+ White for ground-wire connect on contact

You should add this ground-wire in your side maybe

3D NM Alma laser soprano ice platinum laser tip Specifictaions

 

Model No 3D NM Alma laser soprano ice platinum laser tip
Application Alma Soprano ICE Laser Hair Removal Machine
Operation Mode CW
Number of submounts 12 bars
Power per submounts 80W
Central wavelength at 25℃ 808 ± 5nm
Fast Axis Divergence (FWHM) NO
Slow Axis Divergence (FWHM) NO
Expected lifetime >10000 hours
Typical pitch per bar 1.8mm
Cooling:  
Flow rate 0.3L/min ±10% / bar
Water Temperature 15-25 ℃
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements
 

 

3D NM Alma laser soprano ice platinum laser tip Structure

 

3D NM Alma laser soprano ice platinum laser tip Application

Also you can use it for old original laser alma soprano devices :

Second solution is to change the inner diode laser stack as new from the 3D NM Alma laser soprano ice platinum laser tip .

You may know that there are different inner diode block structure inside this kind of 3D NM Alma laser soprano ice platinum laser tip .

And the most common inner stack are the following A and B kinds, but we will not use original macro channel 12 bars to replace it, since macro channel lifetime is not good. But when we updated into 12bars micro channel , they can match well and working lifetime also better than before.

A kind:

 

You may have A kind of inner stack, then we will use A block to replace like the following, they have same power with B block but with different water way only in order to match the water way and power for working.

B Kind:

While also you may have B kind of block inside your handle like this. The handle stack was fulled covered by the metal structure. Then we will use B kind of block to replace your old diode block.

 

 

If your laser stack like B block then we will use the same B block following to replace it. Anyway we have more than 10 years replacement of the ALma lasers. We know there are more than 5 kind of diode block inside the handle.But their power for matching and working are the same dear.

Experience For various brands diode laser handle repairing use

Any more interest for diode laser repairing service, please kindly add danny whatsapp 0086-18518945778.

 

 

20bars Alma laser diode stack 2kw high power for sale with lens added

20bars Alma laser diode stack 2kw high power for sale with lens added

 

VS-MI-ALMA-2000 Description of 20bars Alma laser diode stack 2KW high power :

 

This diode laser stack VS-MI-ALMA-2000 is for relacement of micro channel diode laser stack of 200W laser hair removal devices of Alma lasers. The original diode is from Alma diode stack and we will make the same for diode laser bar replacement. Also it can be used for high power diode laser stack in industrial application

 

VS-MI-ALMA-2000 20bars Alma laser diode stack 2KW high power Description Advantages:

 

>Save Money. Replace the broken diode stack bar only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Syneron the same. The newest Ausn mounting technology will be applied when assembly. After replacement. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.

 

VS-MI-ALMA-2000 20bars Alma laser diode stack 2KW high power Specifications:

Model No. VS-MI-ALMA-2000
Application laser hair removal handpiece Repair And Replacement
Operation Mode CW
Power per submounts 100W
Number of submounts in one stack 20 bars
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 50A
Maximum Operating current 60A
Typical Threshold current 8A
Maximum Operating Voltage <24 V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Operation Condition non-condensing atmosphere, cleaning room
Expected lifetime 10- 20 millions shots
Typical pitch per bar 2mm
Cooling requirement
Flow rate >3.5L/min
Water Temperature 27+-3°C
Water Quality pure water
cooling system Do not use any material that combination with copper would form galvanic elements

VS-MI-ALMA-2000 20bars Alma laser diode stack 2KW high power Dimension Scheme:

 Any more question about this kind of high power 2KW diode laser stack please kindly contact Danny whatsapp 0086-18518945778

 

 

 

600W laser diode bar module for alma laser similar hair removal machine

600W laser diode bar module details:

This VS-MI-100-6-Alma stack is for 600W laser diode bar module repairing and replacement service. Please find the details in the following:

Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power. And also we can repair other brand like Zema laser, Aroma Laser and also any china branded.

600W laser diode bar module repairing service procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.

600W laser diode bar module repairing service Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany also we have laser bar from USA dilas and Coherent.The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.

 

600W laser diode bar module Specification

Model No VS-MI-100-6-Alma
Application Diode Laser Handle Piece Repair And Replacement
Operation Mode CW
Number of submounts 6 Bars
Power per submounts 100W
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 90A
Typical Threshold current 15A
Maximum Operating Voltage 12V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Expected lifetime >10000 Hours
Typical pitch per bar 1.8mm
Cooling
Flow rate 0.3L/min ±10% / Bar
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements

600W laser diode bar module Dimension:

Any more question please kindly add my whatsapp 0086-18518945778

Micro channel 400W USA Dilas diode laser bar for replacement

400W USA Dilas diode laser bar description:

This VS-MI-100-4-Dilas stack is for 400W USA Dilas diode laser bar repairing service. Please find the details in the following:

Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power. And also we can repair other brand like Zema laser, Aroma Laser and also any china branded.

400W USA Dilas diode laser bar repairing service procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.

400W USA Dilas diode laser bar repairing service Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany also we have laser bar from USA dilas and Coherent.The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.

400W USA Dilas diode laser bar Specification

Model No VS-MI-100-4-Dilas
Application Diode Laser Handle Piece Repair And Replacement
Operation Mode CW
Number of submounts 4 Bars
Power per submounts 100W
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 90A
Typical Threshold current 15A
Maximum Operating Voltage 8V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Expected lifetime >10000 Hours
Typical pitch per bar 1.8mm
Cooling
Flow rate 0.3L/min ±10% / Bar
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements

400W USA Dilas diode laser bar Dimension:

Any more question please kindly add my whatsapp 0086-18518945778

800W Zema laser handle repairing service with 10bars*80W micro channel bar

800W Zema laser handle repairing service description:

This VS-MI-80-10-Zema stack is for 800W Zema laser handle repairing service. Please find the details in the following:

Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power. And also we can repair other brand like Zema laser, Aroma Laser and also any china branded.

800W Zema laser handle 800W Zema laser handle 800W Zema laser handle

800W Zema laser handle repairing service procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. 

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

800W Zema laser handle repairing service Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany also we have laser bar from USA dilas and Coherent.The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.                   

800W Zema laser handle repairing service Specification

Model No VS-MI-80-10-Zema
Application Alma Soprano Handle Piece Repair And Replacement
Operation Mode CW
Number of submounts 10 Bars
Power per submounts 100W
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 90A
Typical Threshold current 15A
Maximum Operating Voltage 20V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Expected lifetime >10000 Hours
Typical pitch per bar 1.8mm
Cooling  
Flow rate 0.3L/min ±10% / Bar
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements

800W Zema laser handle repairing service Dimension:

800W Zema laser handle

800W Zema laser handle repairing service application:

800W Zema laser handle800W Zema laser handle 800W Zema laser handle 800W Zema laser handle

Any more question please kindly add my whatsapp 0086-18518945778.

 

300W macro channel laser diode replacement service

300W macro channel laser diode description:

This VS-MA-50-6-B-808 is an 808nm diode laser stack, which has 6 pcs bars mounted on an big cooper heatsink. This stack has an aluminum shell. Electrodes are on the back of the stack. water holes are on the bottom of the stack.

It is used for 808nm diode laser hair removal handpiece repairing and replacement. Usually in Cheap machine from China. 

Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power.

300W macro channel laser diode Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.  

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

 

300W macro channel laser diode repair Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.   

300W macro channel laser diode Dimensions:

300W macro channel laser diode Specification

Model No. VS-MA-50-6-B-808
Application 808nm laser hair removal Handpiece Repair And Replacement
Operation Mode CW
Power per submounts 40W
Number of submounts in one stack 6bars
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 40A
Maximum Operating current 50A
Typical Threshold current 15A
Maximum Operating Voltage <10V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Operation Condition non-condensing atmosphere, cleaning room
Expected lifetime 10000 hours
Typical pitch per bar 1.8mm
Cooling requirement
Flow rate >2.5L/min
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements

1600w 32bars macro channel laser stack for hair removal device replacement

1600w 32bars macro channel laser stack description

This diode laser stack VS-MA-50-32(2×16) Model A for hair removal which has 2pcs 16bars vertical stack assembled together. totally 32pcs diode laser bars in one aluminum shell. The optical power is 1600W. This 1600W diode lasers usually used in high power big window size diode laser hair removal machine such as equipment brand ADSS or Apolomed. The water are on the bottom. And electrode is on the back.
It is used for most of diode laser hair removal machine from China. wavelength 808 or mix wavelength as 755, 808 and 1064.
This diode laser stack usually burn out after working 1 year. Then it need to be refresh. Or you can buy a new one to replace the old one.

1600w 32bars macro channel laser stack Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.
>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.
>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.

1600w 32bars macro channel laser stack Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient
>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before
>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.   

1600w 32bars macro channel laser stack Specification

Model No. VS-MA-50-32(2×16) Model A
Application laser hair removal handpiece Repair And Replacement
Operation Mode CW
Power per submounts 50W
Total optical power 1600W
Number of submounts in one stack 32 bars
Central wavelength at 25 808 ± 5nm,  755nm and 1064 nm upon require
Typical Operation current 40A
Maximum Operating current 50A
Typical Threshold current 8A
Maximum Operating Voltage <20V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Operation Condition non-condensing atmosphere, cleaning room
Expected lifetime 10 millions shots
Typical pitch per bar 2 mm
Cooling requirement
Flow rate >3L/min
Water Temperature 27+-3°C
Water Quality pure water
cooling system Do not use any material that combination with copper would form galvanic elements

1600w 32bars macro channel laser stack Dimension

Any more questions please contact Danny whatsapp 0086-18518945778.

Alma laser bar first generation replacement diode

Alma laser bar description:

This VS-MI-60-12-Alma-Soprano-A is Alma Soprano 12 bar laser stack with PEEK side plate. The electrodes are on the back of  the stack.

It is used for Alma Soprano handle piece repairing and replacement.

Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks. Also we can use the same Jenoptik bar like Alma used to recondition the power of the alma lasers.

 

Alma laser bar Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. 

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

Alma laser bar repair Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.         

     

 

Alma laser bar Specification

Model No VS-MI-60-12-AlmaSoprano-A
Application Alma Soprano Handle Piece Repair And Replacement
Operation Mode CW
Number of submounts 12 Bars
Power per submounts 100W
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 90A
Typical Threshold current 15A
Maximum Operating Voltage 24V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM)
Expected lifetime >10000 Hours
Typical pitch per bar 1.8mm
Cooling  
Flow rate 0.3L/min ±10% / Bar
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements


Alma laser bar
Dimension

810nm Alma lasers diode


Alma laser bar Applications:

Any more questions please kindly contact Danny whatsapp 0086-18518945778.

Original 800w diode laser stack Syneron laser hair removal system from Dilas

Original 800w diode laser stack Syneron Description:

This VS-MI-100-8-Syneron A is 8 bars laser stack special for syneron-candala 808nm diode laser hair removal handpieces.

Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power

Syneron laser hair removal handle Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece.

Original 800w diode laser stack Syneron Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.

 

Original 800w diode laser stack Syneron Specification

Model NO. VS-MI-100-8-Syneron A
Application Syneron-candala 808nm diode laser hair removal Handpiece Repair And Replacement
Function Hair removal, Skin rejuvenation
Central wavelength at 25℃ 808±5nm
Laser bar Germany Jenoptik bar
Laser stack type Micro channel cooled vertical diode laser stack
Operation mode CW
Laser power 800W
Per bar power 100W
Bars number 8 pieces
Maximum operating voltage 16V
Fast axis divergence (FWHM) 39º
Slow axis divergence (FWHM)
Typical pitch per bar 1.8mm
Expected lifetime >10000 hours
Cooling system Micro channel cooler + Water + TEC
Water cooling condition 1.Flow rate: 0.3L/min ±10% / bar

2.water temperature: 15~25℃

3.Water quality: Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm

4.Cooling: Don’t use any material that combined with copper, that would form galvanic elements


Original 800w diode laser stack Syneron Dimension

Original 800w diode laser stack Syneron Application

Any more questions please contact Danny whatsapp 0086-18518945778

Alma Lasers Soprano XL / ICE/ XLi/ Accord Alma Laser Tip Refurbishment With Jenoptik Bars

Alma Lasers Soprano XL / ICE/ XLi/ Accord Alma Laser Tip Refurbishment details:

Alma Lasers Soprano XL/ICE/XLi/Accord Alma Laser Tip Refurbishment specifications:

Model No VS-MI-808-100-1.5-12:0-Alma-12
Application Alma Soprano Handle Piece Repair And Replacement
Operation Mode CW
Number of submounts 12 Bars
Power per submounts 100W
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 60A
Typical Threshold current 15A
Maximum Operating Voltage 24V
Fast Axis Divergence (FWHM) NO
Slow Axis Divergence (FWHM) NO
Expected lifetime >10000 Hours
Typical pitch per bar 1.8mm
Cooling:
Flow rate 0.3L/min ±10% / Bar
Water Temperature 15-25 ℃
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements

Alma Lasers Soprano XL / ICE/ XLi/ Accord Alma Laser Tip Refurbishment Stack Dimension

Alma lasers soprano

Alma Laser Tip Refurbishment handle piece and laser stack repair process:

First, the customers need to send us the old diode as below pictures shows, if can’t send old diode laser, need send to us structure design of the diode and dimension details stack. We will repair the old diode or design a new stack to replace the old one.

alma laser soprano xl process-1

 

Second, we disassemble the handle piece, and test the old laser stack. For the micro channel laser stack, Such as Alam laser, Lightsheer, Syneron , we will test each laser plate one by one to confirm whether there are any one bars still can work. If there have some good bars, the repairing charge will lower. For macro laser stack like most product made in China, we will test whole laser stack together.

alma laser soprano xl process-2

Third, we choose best quality laser stack to replace the old broken one. Our bars are imported from Germany. We mounted bars and assemble them to laser stack in our lab.Every stack will be fully tested and had 8 hours buring test.

alma laser soprano xl process-3

 

Finally, our experienced technician will reassemble the handle piece. Which include:

a: Install the new laser stack into the handle piece

b: Clean lens and check the TEC and other parts inside the handle piece

c: Test the power output of whole handle piece

d: Clean the cover shell of handle piece and package it.

We can repair variety brand diode laser stack and lase handle.

alma laser soprano xl (English)alma laser soprano xl 1(English)

Any more interest please kindly contact Danny whatsapp 0086-18518945778