SM-06662 Alma Lasers Soprano XLi diode stack Description :
This Alma-12-2 810nm Alma Lasers Soprano XLi diode stack is used for Alma Soprano 12 bar black side plate diode stack.Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power.
Alma Lasers Soprano XLi diode stack Specification:
| Model No | VS-MI-808-100-1.5-12:0-Alma-12-2 |
| Application | Alma Soprano Handle Piece Repair And Replacement |
| Operation Mode | CW |
| Number of submounts | 12 Bars |
| Power per submounts | 100W |
| Central wavelength at 25℃ | 808 ± 5nm |
| Typical Operation current | 60A |
| Typical Threshold current | 15A |
| Maximum Operating Voltage | 24V |
| Fast Axis Divergence (FWHM) | NO |
| Slow Axis Divergence (FWHM) | NO |
| Expected lifetime | >10000 Hours |
| Typical pitch per bar | 1.8mm |
| Cooling: | |
| Flow rate | 0.3L/min ±10% / Bar |
| Water Temperature | 15-25 ℃ |
| Water Quality | Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm |
| cooling system | Do not use any material that combination with copper would form galvanic elements |
Alma Lasers Soprano XLi diode stack Dimension
We can offer different diode laser stack for Alma lasers soprano solution. Per our experience, alma lasers so far have different stack for Soprano XL, Soprano XLi and Soprano ICE. Also Alma lasers are with three wavelength for the Alma lasers Soprano ICE Platinum, each of them we can make the replacement and repairing service.
If you have any similar problem, you can contact Danny by 0086-18518945778 [chat]
