Friday, March 29, 2024
Home808nm Diode Laser Stack800W Zema laser handle repairing service with 10bars*80W micro channel bar

800W Zema laser handle repairing service with 10bars*80W micro channel bar

800W Zema laser handle repairing service description:

This VS-MI-80-10-Zema stack is for 800W Zema laser handle repairing service. Please find the details in the following:

Oriental-laser focused on diode laser bar assembling for more than 16 years and we have seen various alma soprano diode laser stacks.Also we can use the same Jenoptik bar like Alma used to recondition the power the laser soprano power. And also we can repair other brand like Zema laser, Aroma Laser and also any china branded.

800W Zema laser handle 800W Zema laser handle 800W Zema laser handle

800W Zema laser handle repairing service procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack. 

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

800W Zema laser handle repairing service Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany also we have laser bar from USA dilas and Coherent.The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.                   

800W Zema laser handle repairing service Specification

Model No VS-MI-80-10-Zema
Application Alma Soprano Handle Piece Repair And Replacement
Operation Mode CW
Number of submounts 10 Bars
Power per submounts 100W
Central wavelength at 25℃ 808 ± 5nm
Typical Operation current 90A
Typical Threshold current 15A
Maximum Operating Voltage 20V
Fast Axis Divergence (FWHM) 39º
Slow Axis Divergence (FWHM) 8º
Expected lifetime >10000 Hours
Typical pitch per bar 1.8mm
Cooling  
Flow rate 0.3L/min ±10% / Bar
Water Temperature 25+-3°C
Water Quality Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system Do not use any material that combination with copper would form galvanic elements

800W Zema laser handle repairing service Dimension:

800W Zema laser handle

800W Zema laser handle repairing service application:

800W Zema laser handle800W Zema laser handle 800W Zema laser handle 800W Zema laser handle

Any more question please kindly add my whatsapp 0086-18518945778.

 

RELATED ARTICLES

LEAVE A REPLY

Please enter your comment!
Please enter your name here

Contact Us

Name: Danny.Jin
Email: [email protected]
Whatsapp: 0086-18518945778

POPULAR CATEGORY