400W laser diode stack description
This is 400W laser diode stack micro channel 808nm for hair removal machine repairing. And they can be used for Focuslight similar diode laser stack. Also it can be used for wavelength 810nm laser diode stack micro channel also.
We have different diode laser stack spare parts reparing service.Please find the following details of the spare parts for 4bar diode laser stack:
Item | name | material | size |
1 | positive electrode | brass with gold plating | 8cm*16cm*14cm |
2 | cavity surface | Polysulfone resin | 40cm*27cm |
3 | negative electrode | Brass with gold plating | 10.8cm*7.5cm*14cm |
4 | Positive and negitive cover | Polysulfone resin | 8cm*16cm |
5 | Side plate | Aluminum oxide | 40cm*27cm |
6 | cavity surface | Polysulfone resin | 16cm*30cm |
400W laser diode stack dimension Scheme:
With this laser diode stack dimension scheme, please kindly confirm with your engineer about the size, length, width and height of the diode laser stack. Also for the holes position must be accuratly the same.
This is 4 bars* 100W diode laser stack for replacement of laser hair removal machine. If your handle have some bar not working but you do not want to pay high cost for a new handle gun. You can buy just a new stack to do replacement in your side if you have professional engineer and good working environments. Also this kind of stack have similar design for diode 300W,400W,500W,600W and 700W. Just need confirm how many bar for working 100W is ok.
400W laser diode stack Specifictaions:
Model No | VS-MI-808-100-4-N1 |
Application | Diode laser 808nm 400W stack module for epilator system |
Operation Mode | CW |
Number of submounts | 4 Bars |
Power per submounts | 100W or 60w optional |
Central wavelength at 25℃ | 808 ± 5nm |
Maximum Operating Voltage | 8V |
Fast Axis Divergence (FWHM) | No |
Slow Axis Divergence (FWHM) | No |
Expected lifetime | >10000 hours |
Typical pitch per bar | 1.8mm |
Cooling: | |
Flow rate | 0.3L/min ±10% / bar |
Water Temperature | 15-25 ℃ |
Water Quality | Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm |
cooling system | Do not use any material that combination with copper would form galvanic elements |