1.1064nm diode chips description:
1064nm diode chips are used for hair removal machine laser gun repairing and replacement. Common repairing brand are mainly Alma lasers soprano XL, soprano ICE or Syneron, Cynosure and Aroma and so on.
If you have any similar problem with your laser hair removal machine, also you have good engineer who can assembly bars and do the replacement accurately, you can buy this kind of 60W diode laser bar to do the replacement locally. It will be most cost-effective.
2.60W diode laser bar Specification
|Wavelength(cw)||1064 ± 3 nm|
|Optical Output Power||60W/80W/100W|
|Operation Mode||cw, switched|
|Fast Axis Divergence (FWHM)||36°|
|Slow Axis Divergence at 100w (FWHM)||6°|
|Spectral Bandwidth (FWHM)||2nm|
|Degree of TE Polarization(Min)||98%|
|EO Conversion Efficiency||56%|
|Typical pitch per bar||1.8mm|
|Cooling:||Flow rate: 0.3L/min ±10% / bar
Water Temperature: 15-25 ℃
Water Quality: Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm
cooling system: Do not use any material that combination with copper would form galvanic elements
* Mounted on a heat sink with Rth = 0.5 K/W, coolant temperature 25 °C, operating at nominal power
* Full width at 95 % power content
Note: Nominal data represents typical values.
* Laser bars are the active components in high-power diode lasers in accordance to IEC standard class 4 laser products.
* As delivered, laser bars cannot emit any laser beam. The laser beam can only be released if the bars are connected to a source of electrical energy. In this case, IEC-Standard 60825-1 describes
* the safety regulations to be taken to avoid personal injury.
3.60W diode laser bar dimension:
4 .1064nm diode chips Application:
If you have any more question about 60W diode laser bar, please kindly contact danny whatsapp : 0086-18518945778