Lasertel brand GTH-500-MA 500W macro channel diode laser module

500W macro channel diode laser module Details:

This VS-MA-50-5-GTH is an 808nm diode laser stack, which has 5pcs bars mounted on an big cooper heatsink. This stack has an aluminum shell. Electrodes are on the back of the stack. This kinds of stack maybe have 3 real bars with 2 decorate bars or 4 real bars with 1 decorate bars or 5 real bars.

It is used for 808nm diode laser hair removal handpiece repairing and replacement. Usually in Cheap machine from China.

500W macro channel diode laser module Repairing procedure

>Choice A: Send the old broken handpiece to our factory. We will do the process of checking , repairing, cleaning and etc. Then send the fresh new handpiece back to you.

>Choice B:  if you have basic assembly capacity, you can send the diode laser stack only to our factory. We remove the old bar and mount the new bar to recover the laser power of the stack.

>Choice C: Measure your stack and confirm the water pipe hole and screw hole position. Then press the button below to buy a ready-made stack which is match your old handpiece. 

500W macro channel diode laser module Advantages

>Save Money. Replace the broken diode stack only. Low cost and convenient

>Long lifetime.  we use diode laser bars from Germany. The newest Ausn mounting technology will be applied when repairing. After repair. The handpiece will be as a new one. lifetime is much longer than before

>All technical support available. We major in diode laser mounting, software, spare parts over 16 years. All the technologies about laser hair removal machine are open to you.    

500W macro channel diode laser module Specifications:

Model No. 

VS-MA-50-10 Model F/GTHM-500

Application

laser hair removal handpiece Repair And Replacement

Operation Mode

CW

Power per submounts

50W

Number of submounts in one stack

10bars

Central wavelength at 25℃

808 ± 5nm

Typical Operation current

40A

Maximum Operating current

50A

Typical Threshold current

8A

Maximum Operating Voltage

<20V

Fast Axis Divergence (FWHM)

39º

Slow Axis Divergence (FWHM)

Operation Condition

non-condensing atmosphere, cleaning room

Expected lifetime

10 millions shots

Typical pitch per bar

2mm

Cooling requirement

 

Flow rate

>3.5L/min 

Water Temperature

27+-3°C

Water Quality

pure water

cooling system

Do not use any material that combination with copper would form galvanic elements

500W macro channel diode laser module Dimension:

Any more question please contact Danny whatsapp 0086-18518945778.

 

Please follow and like us: