Focus Light 400W diode laser module Details:
This Focus Light 400W diode laser module was made for repairing and replacement of hair removal device. They can be optional from 3bars,4 bars and 5bars.If you have similar diode module need to be repaired, please kindly contact Danny.
Focus Light 400W diode laser module Specifictaions:
| Model No | VS-MI-808-100-4-N1 |
| Application | Focus Light 400W diode laser module for epilator system |
| Operation Mode | CW |
| Number of submounts | 4 Bars |
| Power per submounts | 100W or 60w optional |
| Central wavelength at 25℃ | 808 ± 5nm |
| Maximum Operating Voltage | 8V |
| Fast Axis Divergence (FWHM) | No |
| Slow Axis Divergence (FWHM) | No |
| Expected lifetime | >10000 hours |
| Typical pitch per bar | 1.8mm |
| Cooling: | |
| Flow rate | 0.3L/min ±10% / bar |
| Water Temperature | 15-25 ℃ |
| Water Quality | Deionized 2-10 µs/cm, mixed bed ion exchanger,particle filter<25µm |
| cooling system | Do not use any material that combination with copper would form galvanic elements |
Focus Light 400W diode laser module dimension Scheme:
With this laser diode stack dimension scheme, please kindly confirm with your engineer about the size, length, width and height of the diode laser stack. Also for the holes position must be accuratly the same.
This is 4 bars* 100W diode laser stack for replacement of laser hair removal machine. If your handle have some bar not working but you do not want to pay high cost for a new handle gun. You can buy just a new stack to do replacement in your side if you have professional engineer and good working environments. Also this kind of stack have similar design for diode 300W,400W,500W,600W and 700W. Just need confirm how many bar for working 100W is ok.
Any more question please contact my whatsapp 0086-18518945778 [chat]
